ZK -SAMp Manuale Utente Scaricare il pdf (Pagina 15)

201 Circle Drive N, Suite 116 Piscataway, NJ 08854 Tel: 732-412-6007 Fax: 732-412-6008

www.zkaccess.com

IP Address: Please enter the IP Address of the access control panel;

IP Port No.: In Ethernet mode, the default is 4370;

RS485:

Serial Port Number: COM1-COM254;

485 Address: The machine number. When serial port numbers are the same, there will be no repeated 485 addresses;

Baud Rate: Same as the baud rate of the device (9600/ 19200/ 38400/ 57600/115200). The default is 38400;

Device Name: Any character, up to a combination of 20 characters;

Communication Password: Any character, up to a combination of 15 characters (No blank). You need to input this field only

when you add a new device with the communication password. It cannot be modified when you edit the device information

except in [Modify Communication Password] operation. Please refer to 6.3.1 Door Management.



Note: You do not need to input this field if the device has no communication password, such as when it is a new factory

device or just after initialization.

Panel Type: One-door panel, two-door panel, four-door panel;

Switch to Two-door Two-way: When four-door panel is selected, this box will appear. By default, it is not ticked. This

parameter is used to switch the four-door one-way access control panel to two-door two-way access control panel (For

changes of extended device parameters before and after switching, see relevant files of access control panel).



Note: After the four door one-way access control panel is switched to two- door two-way access control panel, to switch

back, you need delete the device from the system and add it again. When adding, do not tick the check box before this

parameter.

Auto Synchronizes Device Time: By default it is ticked, namely, it will synchronize device time with server time each time

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

Nessun commento

ZK -SAMp Manuale Utente Pagina 15